1. Define Your Buyer Requirements First

Before comparing specifications, write down:

• Batch volume: how many kilograms of product you need to smoke, dry or roast per cycle.
• Available utilities: electricity supply (voltage and spare capacity), gas or steam at your site.
• Floor space and access: the footprint and height available where the unit will be installed.
• Process range: the temperatures and humidity conditions your recipes need.
• Control and data needs: whether you need batch tracking, alerts or energy monitoring.

These answers determine whether the Yx50 Fully Automatic Smokehouse fits your plant.

2. Published Specifications at a Glance

3. Selection Criteria and What to Check

Batch capacity

The unit is rated at 50 kg per batch. Divide your daily volume by the number of cycles you can realistically run per shift. If the result is far above 50 kg per cycle, a single Yx50 may not meet your throughput. In that case, ask the supplier about other options. This guide does not assess any other models.

Heating method and site utilities

The product page lists electric, gas or steam heating, described as a way to suit different factory utility setups. Tell the supplier which heating method you need, and confirm how that version is configured and what utility connections it requires.

Electrical supply

The published voltage is 380V and total power is 30 kW, plus 18 kW for the steam generator. Check these figures against your site's supply. Electrical standards differ across the United States, Europe, the Middle East and Southeast Asia, so confirm voltage, frequency and any adaptation with the supplier before ordering. Do not assume the unit is compatible.

Footprint and chamber size

The installation dimensions are 1500 × 1250 × 2100 mm and the working space is 880 × 950 × 1100 mm. Check the installed height and door clearance on site. Also confirm that your trolleys, racks or hanging rods fit inside the working space.

Temperature range

The published maximum temperature is 120°C, and the manufacturer says it can be held with high stability for even smoking and cooking. If any of your recipes need conditions outside this range, the Yx50 Fully Automatic Smokehouse is not suitable for those products.

Construction and insulation

The internal chamber is listed as food-grade stainless steel, with a 55 mm insulation layer. The manufacturer says the insulation reduces heat loss and energy use and protects operators. If your market requires specific material or hygiene documents, request them from the supplier. The published material does not include any certifications.

Heating elements and motor

The manufacturer says its finned electric heating tubes offer a heat-dissipation surface 2–3 times larger than conventional elements, for faster heating. The unit uses a YE2-90S-2 pure copper waterproof motor intended for humid environments. These are manufacturer descriptions, not independent test results.

Automation and control functions

The product is described as fully automatic, managing timing and temperature to reduce manual monitoring. The product page also lists these management functions:

• Batch monitoring for traceability
• Thermal calibration for different meat types and recipes
• Alerts for cycle completion or temperature deviations
• Humidity control through the integrated steam generator
• Inventory sync with production line data
• Energy analytics for the 30 kW system

If your purchase depends on any of these functions, especially inventory sync or data integration with your existing systems, ask the supplier to show how it works and confirm what is included in the configuration you are quoted.

4. When the Yx50 May Fit and When It May Not

Likely fit:

• Producers of sausages and other processed meats who smoke, dry or roast in batches of about 50 kg.
• Plants that want to replace a manually monitored furnace with automatic timing and temperature control.
• Sites that can provide 380V power and the heating utility they choose.

Likely not a fit, or needs confirmation:

• Lines that need much more than 50 kg per batch from one unit.
• Processes that need temperatures above 120°C.
• Sites without a compatible power supply, or without room for the installation dimensions above.
• Buyers who need specific certifications, set prices or delivery dates before shortlisting. None of these are in the published material.

5. Questions to Send the Supplier

1. Which heating configuration (electric, gas or steam) matches our utilities, and what connections does it need?
2. Can the electrical specification be matched to the supply in our country?
3. Which of the listed management functions come standard in the quoted configuration?
4. What documentation is available for materials and compliance in our market?
5. What are the price, lead time, installation and after-sales terms?

Summary

The Yx50 Fully Automatic Smokehouse is published as a 50 kg-per-batch unit with electric, gas or steam heating, 380V supply, a 120°C maximum temperature, a food-grade stainless steel chamber and 55 mm insulation. Check these figures against your throughput, utilities, space and recipes before asking for a quotation. Review the full details on the Yx50 Fully Automatic Smokehouse product page.